Toro 58604 - Installing the Tines

1
InstallingtheTines
Partsneededforthisprocedure:
1
Leftoutertineset
1Rightoutertineset
2
Tineshaftsleeve
2
Locknut(M10)
2Lockwasher
2
Bolt(M10x45mm)
Procedure
WARNING
Whentheoutertinesareinstalled,operating
themachinewithoutthesideshieldscould
exposeyouorotherstotinecontact,causing
injuryordeath.
•Alwaysinstallthesideshieldswhenever
theoutertinesareinstalled.
•Neverputyourhandsorfeetunderthe
machine.
1.Removethehandknobboltsfrombothsides
ofthetiller.Cutthecabletiesfromthelower
handlebarassemblyandseparateitfromthe
pulleybox.
g395597
Figure3
1.Handknob
7