To Next PageTo Next PageWhat to do if my Toro 72908 won't drive?
If your Toro Lawn Mower isn't driving, check these items: * Ensure the bypass valves are tightly closed. * Change the pump belt if it is worn, loose, or broken. * Change the pump belt if it is off a pulley. * Replace the idler spring if it is broken or missing. * Add hydraulic oil to the reservoirs or allow it to cool down if the hydraulic oil level is low or too hot.
Why Toro 72908 Lawn Mower blades do not rotate?
If the blades on your Toro Lawn Mower aren't rotating, it could be due to a worn, loose, or broken mower deck belt; in this case, install a new deck belt. Also, check if the mower deck belt is off a pulley and install the mower deck pulley, checking the idler pulley, idler arm, and spring for correct position and function. Inspect the pump drive belt for wear, looseness, or breakage, and check the belt tension or install a new belt. If the idler spring is broken or missing, replace it.
Why is my Toro 72908 vibrating so much?
If your Toro Lawn Mower is vibrating abnormally, several components could be the cause. Check the cutting blades for bending or imbalance and install new ones if necessary. Ensure the blade mounting bolt and the engine mounting bolts are tightened securely. Inspect the engine pulley, idler pulley, or blade pulley for looseness and tighten the appropriate pulley. For issues such as a damaged engine pulley, a bent blade spindle, or a loose/worn motor mount, contact an Authorized Service Dealer.
Why does my Toro 72908 pull to the left or right?
If your mower pulls to one side, the tracking may need adjustment, or the tire pressure in the drive tires may not be correct. Adjust the tracking and the tire pressure in the drive tires.
What causes the blades to not rotate on my Toro 72908?
If the blades on your Toro Lawn Mower do not rotate, it could be due to a damaged, worn, loose, or broken mower deck belt; install a new deck belt. Ensure the mower deck belt is properly installed on the deck pulley, checking the idler pulley, idler arm, and spring for correct position and function. Also, a worn, loose, or broken pump drive belt can cause this issue, so check the belt tension or install a new belt. Finally, check the idler spring and replace it if it is broken or missing.
Why aren't the blades rotating on my Toro 72908?
If the blades on your Toro Lawn Mower aren't rotating, check the following: replace the deck belt if it is damaged, worn, loose, or broken. Install the mower belt on the deck pulley and check the idler pulley, idler arm, and spring for correct position and function. Check the belt tension or install a new belt if the pump drive belt is worn, loose, or broken. Replace the spring if the idler spring is broken or missing.
Why Toro Lawn Mower engine loses power?
If your Toro Lawn Mower engine is losing power, consider these potential causes. First, the engine load might be excessive, so reduce the ground speed. A dirty air cleaner can also cause power loss, so clean the air-cleaner element. Additionally, check the oil level in the crankcase and add oil if it's low. Finally, ensure the cooling fins and air passages above the engine are free from obstructions.
What to do if the blades don't rotate on my Toro Lawn Mower?
If the blades on your Toro Lawn Mower do not rotate, install a new deck belt, install the mower deck pulley and check the idler pulley, idler arm, and spring for correct position and function, check the belt tension or install a new belt, or replace the spring.
Why don't the blades rotate on my Toro 72908?
If the blades on your Toro Lawn Mower aren't rotating, it could be due to a worn, loose, or broken mower deck belt, the mower deck belt being off the pulley, a worn, loose, or broken pump drive belt, or a broken or missing idler spring. Try installing a new deck belt, installing the mower deck pulley and checking the idler pulley, idler arm, and spring for correct position and function, checking the belt tension or installing a new belt, and replacing the spring.
Why won't my Toro Lawn Mower starter crank?
If the starter on your Toro Lawn Mower doesn't crank, there are several possible reasons. First, ensure the blade control switch (PTO) is disengaged and the parking brake is set. Also, make sure the drive levers are in the neutral lock position and that you are seated on the seat. If these aren't the problem, check if the battery is dead and charge it if necessary. Inspect the electrical connections for corrosion or looseness, and replace the fuse if it's blown.
General| Brand | Toro |
|---|---|
| Model | 72908 |
| Category | Lawn Mower |
| Language | English |
