To Next PageTo Next Page
Need help?Do you have a question about the Toro 73449 Wheel Horse 314-8 and is the answer not in the manual?
General| Power | 14 hp |
|---|---|
| Drive | 2WD |
| Cutting Width | 42 inches |
| Fuel Type | Gasoline |
| Deck Material | Steel |
| Engine | Kohler |
| Engine Type | 4-cycle |
Overview of manual safety information and hazard identification.
Locating and understanding the product's model and serial number plate.
Explains DANGER, WARNING, and CAUTION signal words for hazard levels.
Essential guidelines for operating the machine safely to prevent injury.
Procedures and precautions for safely operating the machine on slopes.
Measures to prevent accidents involving children near the machine.
Key safety steps to follow before performing any service or maintenance.
Identification and purpose of various controls on the machine.
Explanation of the key choice switch and its role in interlock features.
How to set and release the parking brake securely.
Procedures for safely starting and stopping the tractor's engine.
How to engage and disengage the power take off for attachments.
Understanding gauges and indicator lights for monitoring machine status.
How the safety interlock system prevents starting or stops the engine.
Safe operation in reverse, including interlock deactivation.
Procedures to test the safety interlock system before each use.
How to drive the tractor and select appropriate ground speeds.
Using lift lever and Dial-A-Height to control attachments.
Adjusting the seat for operator comfort and control.
Step-by-step instructions for installing the PTO belt.
A comprehensive schedule of maintenance tasks and their frequency.
Procedures for servicing, removing, and cleaning the air cleaner elements.
Intervals for changing oil, checking levels, and replacing the oil filter.
How to remove, check, and install spark plugs.
Schedule, type of grease, and locations for machine lubrication.
Maintaining tire pressure and cleaning the engine cooling system.
Checking and adjusting the parking brake for secure operation.
How to adjust the PTO clutch and brake for proper engagement and stopping.
Measuring and adjusting front wheel toe-in for alignment.
Safety precautions and steps for draining the fuel tank.
Procedure for checking the transaxle fluid level.
Procedures for removing and installing headlight and taillight bulbs.
Removing, installing, checking electrolyte, adding water, and charging the battery.
Information on fuses and the electrical system's wiring diagram.
Causes and corrective actions when the starter motor fails to engage.
Diagnosing and fixing issues with engine starting or continuous operation.
Identifying causes and solutions for reduced engine power.
Troubleshooting causes for engine overheating and abnormal machine vibration.
Diagnosing and resolving problems with the tractor's drive system.
Details on what is covered and not covered by the warranty.
Essential maintenance procedures required to keep the warranty valid.
Steps to follow to get warranty service for the product.
