EasyManua.ls Logo

Toro 74170 - Cutting Height and Roller Adjustments; Adjusting Cutting Height

Toro 74170
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
29
POTENTIAL HAZARD
Someone could move or attempt to operate
the tractor while it is unattended.
WHAT CAN HAPPEN
Children or bystanders may be injured if
they use the tractor.
HOW TO AV
OID THE HAZARD
Always r
emove the ignition key and set the
parking brake when leaving the machine,
even if just for a few minutes.
Instruments
Hour Meter
The hour meter records the number of hours the
engine has operated. It operates when the engine is
running. Use these times for scheduling regular
maintenance.
1
m–4202
Figure 10
1. Hour
meter
Fuel
T
anks
The unit has two fuel tanks, one located on the left
side and one on the right side. Each tank connects to
the fuel shut off valve in the control panel. From
there a common fuel line leads to the engine (Fig.
11).
To use the right side fuel tank rotate the fuel shut off
valve 1/4 turn to the right from the off location. This
uses fuel from the right side tank only. When the right
fuel tank is empty, move the fuel shut off valve 1/4
turn to the left from the off position.
Close fuel shut off valve, on front panel before
transporting or storing machine.
Figure 1
1
1. Shut
of
f valve

Table of Contents

Other manuals for Toro 74170

Related product manuals