Troubleshooting
67
PROBLEM
CORRECTIVE ACTION
POSSIBLE CAUSES
Uneven cutting height.
1.
Blade(s) not sharp.
1.
Sharpen blade(s).
2.
Cutting blade(s) is/are bent.
2.
Install new cutting blade(s).
3.
Mower is not level.
3.
Level mower from
side-to-side and front-to-rear.
4.
Gage wheel not set correctly
.
5.
Underside of mower is dirty
.
4.
Adjust gage wheel height.
5.
Clean the underside of the
mower.
6. T
ire pressure is incorrect.
6.
Adjust tire pressure.
7.
Blade spindle bent.
7.
Contact Authorized Service
Dealer.
Blades do not rotate.
1.
Drive belt is worn, loose or
broken.
1.
Install new drive belt.
2.
Drive belt is of
f pulley
. 2.
Install drive belt and check
adjusting shafts and belt
guides for correct position.
3.
Deck belt is worn, loose or
broken.
3.
Install new deck belt.
To Next Page
Loading...
