Toro 74253CP - Brake Maintenance; Adjusting the Parking Brake

Figure56
1.Hydraulicoilcooler2.Radiator
ChangingtheEngineCoolant
ServiceInterval:Yearly
ContactanAuthorizedServiceDealerforchangingthe
coolant.
BrakeMaintenance
AdjustingtheParkingBrake
ServiceInterval:Every25hours
Every200hours
1.Engagetheparkingbrake,leverup.
2.Measurethelengthofthespring.Measurement
shouldbe2-1/2inch(64mm)betweenthewashers
(Figure57).
3.Ifadjustmentisnecessary,releasetheparkingbrake,
loosenthejamnutbelowthespringandadjustthe
nutdirectlybelowthespring(Figure57).Turnthe
nutuntilthecorrectmeasurementisobtained.Turn
thenutclockwisetoshortenspringlengthandturn
counter-clockwisetolengthenthespring.
4.Tightenthetwonutstogether.
5.Engagetheparkingbrake,leverup.Checkthe
measurementofthespringagain.
6.Ifadjustmentisnecessary,repeattheprocedures
above.
7.Repeatontheoppositesideofmachine.
Figure57
1.Brakeleverinengaged
position
3.Adjustingnutandjamnut
2.Spring2–1/2inch(64mm)
43