Toro 74314 - User Manual

68 pages

To Next Page

To Next Page

Loading...

Form No. 3466-575 Rev A

Z Master

®

8000 Series Riding

Mower

W ith 42in and 48in Cutting Unit

Model No. 74314 —Serial No. 400000000 and Up

Model No. 74316 —Serial No. 400000000 and Up

Model No. 74318 —Serial No. 400000000 and Up

Model No. 74319 —Serial No. 400000000 and Up

Register at www .T oro.com.

Original Instructions (EN)

*3466-575*

Questions and Answers:

M
mirandasamanthaSep 6, 2025
Why don't the blades rotate on my Toro 74314 Lawn Mower?
- E
  Emily CastroSep 6, 2025
  If the blades do not rotate, check the PTO belt for wear, looseness, or breakage; check the belt tension or replace it. Ensure the PTO shaft is connected. Also, verify the PTO belt is on the pulley, check the belt for damage, install the belt and check adjusting shafts and belt guides for correct position.
E
Elizabeth PerrySep 7, 2025
What to do if my Toro Lawn Mower vibrates abnormally?
- S
  Shaun GomezSep 7, 2025
  If your Toro Lawn Mower is vibrating abnormally, you can try the following: install new cutting blade(s), tighten the blade mounting bolt, tighten the engine mounting bolts, and tighten the appropriate pulley. You can also install a new belt.

Toro 74314 Specifications

General

Model	74314
Deck Material	Steel
Cutting Width	22 inches
Drive Type	Self-propelled
Drive System	Personal Pace
Oil Capacity	20 oz

Related product manuals

Preview: Toro 74312

Preview: Toro 74391

Preview: Toro 74398

Preview: Toro 74363

Preview: Toro TimeCutter Z5000 74391

Toro TimeCutter Z5000 74391

Preview: Toro TimeCutter Z4235 74365

Toro TimeCutter Z4235 74365