Toro 74480 - Changing the Location of the Lights; Using Attachments and Accessories

ChangingtheLocationof
theLights
Youcanchangethelocationofthelightsontheroll
barasshowninFigure14.
Tochangethemountinglocation,performthe
following:
1.Removethescrew(5/16x3/4inch),locknut
(5/16inch),andtubeclampsecuringeachlight.
2.Installthe2tubeclampstotherollbarinthe
desiredlocation(Figure14)
3.Secureeachlighttothetubeclampsusingthe
previouslyremovedscrew(5/16x3/4inch)and
locknut(5/16inch).
Note:Donotinstallthelightinalocationwhere
itcoversanyrollbardecal.
g037646
Figure14
1.Mountinglocationsforthelights
UsingAttachmentsand
Accessories
UseonlyToroapprovedattachmentsandaccessories.
Ifyouaddmorethan1accessory-mountkit(i.e.,
bucketkitoruniversalmountkit)isaddedtoanyof
the4locationsshowninFigure15,addafront-weight
kit.ContactanAuthorizedServiceDealerforthe
front-weightkit.
g037417
Figure15
1.Addafront-weightkitwhen2ormoreaccessory-mountkits
areinstalledatthesepositions.
21