Toro 74480 - Adjusting the Anti-Scalp Rollers

4.Selectaholeintheheight-of-cutbracket
correspondingtotheheight-of-cutdesired,and
insertthepin(Figure30).
5.Pushonthedecklift,pulluponthetransport
lockknob,andslowlylowerthemowerdeck.
g036745
Figure30
1.Deck-liftpedal3.Height-of-cutpin
2.Height-of-cutholes
4.Transportlockknob
AdjustingtheAnti-Scalp
Rollers
Wheneveryouchangetheheightofcut,adjustthe
heightoftheanti-scalprollers.
Note:Adjusttheanti-scalprollerssothattherollers
donottouchthegroundinnormal,atmowingareas.
1.Parkthemachineonalevelsurface,disengage
theblade-controlswitchandengagetheparking
brake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Adjusttheanti-scalprollersasshowninFigure
31.
g036848
Figure31
1.Flangenut4.Anti-scalproller
2.Bolt
5.Spacer
3.Bushing
30