Toro 74740 - Pre-Maintenance Procedures; Raising the Seat; Lubrication; Greasing the Bearings

Pre-Maintenance
Procedures
RaisingtheSeat
Makesurethatthemotion-controlleversarelockedin
theparkposition.Lifttheseatforward.
Thefollowingcomponentscanbeaccessedbyraising
theseat:
•Serialplate
•Servicedecal
•Seatadjustmentbolts
•Fuellter
•Batteryandbatterycables
Lubrication
GreasingtheBearings
ServiceInterval:Every25hours—Greaseallthe
lubricationpoints.
GreaseType:No.2generalpurpose,lithium-based
grease
1.Parkthemachineonalevelsurface,and
disengagetheblade-controlswitch.
2.Movethemotion-controlleversoutwardtothe
parkposition,stoptheengine,removethekey,
andwaitforallmovingpartstostopbefore
leavingtheoperatingposition.
3.Cleanthegreasettings(Figure25andFigure
26)witharag.
Note:Makesuretoscrapeanypaintoffofthe
frontofthetting(s).
g014522
Figure25
1.Frontcastertire
decal106-8717
Figure26
Locatedontheseat-panunderside
1.Readtheinstructions
beforeservicingor
performingmaintenance
3.Greaseevery25operating
hours
2.Checkthetirepressure
every25operatinghours
4.Engine
4.Connectagreaseguntoeachtting(Figure25
andFigure26).
26