Toro 74952 - The machine does not drive.; The machine vibrates abnormally.; The machine produces an uneven cutting height.; The blades do not rotate.

Problem
PossibleCauseCorrectiveAction
1.Thebypassvalvesarenotclosedtight.1.Tightenthebypassvalves.
2.Thepumpbeltisworn,loose,or
broken.
2.Changethebelt.
3.Thepumpbeltisoffapulley.3.Changethebelt.
4.Theidlerspringisbrokenormissing.4.Replacethespring.
Themachinedoesnotdrive.
5.Thehydraulicoillevelislowortoohot.5.Addhydraulicoiltothereservoirsor
letitcooldown.
1.Thecuttingblade(s)is/arebentor
unbalanced.
1.Installnewcuttingblade(s).
2.Theblademountingboltisloose.2.Tightentheblademountingbolt.
3.Theenginemountingboltsareloose.3.Tightentheenginemountingbolts.
4.Theenginepulley,idlerpulley,orblade
pulleyisloose.
4.Tightentheappropriatepulley.
5.Theenginepulleyisdamaged.
5.ContactanAuthorizedServiceDealer.
6.Thebladespindleisbent.
6.ContactanAuthorizedServiceDealer.
Themachinevibratesabnormally.
7.Themotormountislooseorworn.
7.ContactanAuthorizedServiceDealer.
1.Theblade(s)is/arenotsharp.1.Sharpentheblade(s).
2.Thecuttingblade(s)is/arebent.2.Installnewcuttingblade(s).
3.Themowerdeckisnotlevel.
3.Levelthemowerdeckfromside-to-side
andfront-to-rear.
4.Theundersideofmowerisdirty.4.Cleantheundersideofthemower.
5.Thetirepressureisnotcorrect.5.Adjustthetirepressure.
Themachineproducesanunevencutting
height.
6.Thebladespindleisbent.
6.ContactanAuthorizedServiceDealer.
1.Themowerdeckbeltisworn,loose,
orbroken.
1.Installanewdeckbelt.
2.Themowerdeckbeltisoffpulley.
2.Installthemowerdeckpulleyand
checktheidlerpulley,idlerarm,and
springforcorrectpositionandfunction.
3.Thepumpdrivebeltisworn,loose,or
broken.
3.Checkthebelttensionorinstallanew
belt.
Thebladesdonotrotate.
4.Theidlerspringisbrokenormissing.4.Replacethespring.
1.Thefuseisblown.1.Replacethefuse.Checkthecoil
resistance,batterycharge,charging
system,andwiringconnections,and
replacecomponentsifnecessary.
2.Thereislowvoltagesupplyatthe
clutch.
2.Checkthecoilresistance,battery
charge,chargingsystem,andwiring
connectionsandreplacepartsif
necessary.
3.Thecoilisdamaged.3.Replacetheclutch.
4.Thereisinadequatecurrentsupply.4.Repairorreplacetheclutchlead
wireorelectricalsystem.Cleanthe
connectorcontacts.
Theclutchdoesnotengage.
5.Therotor/armatureairgapistoolarge.
5.Removetheshimorreplacetheclutch.
64