Toro 75305 - Choke Control Assembly Replacement

ThrottleControlAssemblyInstallation(continued)
8.Connectthebatterybyinstallingthepositivecablerst,thenthenegative
cabletothebattery.
ChokeControlAssemblyReplacement
ChokeControlAssemblyRemoval
1.ParkthemachineonalevelsurfaceanddisengagethePTO.Stoptheengine,
waitforallmovingpartstostop,andremovekey.Engagetheparkingbrake.
2.Disconnectthebatterybyremovingthenegativecablerst,thenthepositive
cablefromthebattery.
3.Loosentheclampsecuringthechokecabletothechokeplateontheengine.
g323084
Figure46
4.Removethechokecablefromtheplate,notingthepositionofthecable
intheplate.
5.Removethecontrolpanelassemblyfromtherightconsole.
6.Onthebottomsideofthecontrolpanelassembly,loosenthejamnut
securingthechokeleverinplace.Removethenutfromthechokecable.
7.Pullthechokecableassemblythroughthecontrolpanelassemblyandout
ofthemachine.
ChokeControlAssemblyInstallation
1.Routethechokecablethroughthecontrolpanelassembly
2.Threadthejamnutoverthechokecableuptothecontrolpanel.
Chassis:ServiceandRepairs
Page5–22
TitanServiceManual
3438-774RevA