Toro 77281 - Page 85

Left Hand Pod Removal (continued)
g432460
Figure 84
9. Using a T40 torx driver , remove the 2 (5/16 inch) bolts securing the LH rear
guard to the chassis. Remove the LH rear guard.
g421544
Figure 85
10. Remove the LH pod.
Left Hand Pod Installation
1. Install the LH pod.
2. Install the LH rear guard. Using a T40 torx driver , install the 2 (5/16 inch)
bolts to secure the LH rear guard to the chassis.
Note: Lift the LH pod to allow the LH rear guard to seat into position.
2000 Series Z MASTER®Service Manual Page 6–21 Chassis: Service and Repairs
3460-328 Rev A