Toro 88500 - User Manual

To Next Page

FormNo.3424-963RevA

20VMaxLi-IonBatteryandBatteryCharger

ModelNo.88500—SerialNo.319000001andUp

ModelNo.88502—SerialNo.319000001andUp

Operator'sManual

YoumaycontactTorodirectlyatwww.Toro.comfor

productandaccessoryinformation,helpndinga

dealer,thecompletewarrantydetails,ortoregister

yourproduct.

WARNING

CALIFORNIA

Proposition65Warning

Thepowercordonthisproductcontains

lead,achemicalknowntotheState

ofCaliforniatocausebirthdefects

orotherreproductiveharm.Wash

handsafterhandling.

Safety

Importantsafetyinstructions—Savethese

instructions.

DANGER

Toreducetheriskofreorelectricshock,

carefullyfollowtheseinstructions:

1.Besurevoltageselectorisincorrect

voltagepositionbeforepluggingin.

2.ForuseintheU.S.A.,thevoltageselector

switchmustbeplacedinthe120volt

position.Foruseincountriesotherthan

theU.S.A.,thevoltageselectormayneed

tobeplacedinotherthanthe120volt

position.Conrmthevoltageavailable

ateachcountrylocationbeforeusing

theproduct.

3.Forconnectiontoasupplynotinthe

U.S.A.,useanattachmentplugadapter

ofthepropercongurationforthepower

outlet,ifneeded.

CAUTION

Thebatteryusedinthisdevicemaypresenta

riskofreorchemicalburnifmistreated.

Donotdisassemble,heatabove104degrees

F(40degreesC),orincinerate.Replace

batterywithTorogenuinebatteriesonly.Use

ofanotherbatterymaypresentariskofre

orexplosion.

CAUTION

Disposeofausedbatterypromptly.Keep

awayfromchildren.Donotdisassembleand

donotdisposeofinre.

CAUTION

Overheatingbatteriescancausereand

severeburns.

Donotopen,crush,heatabove104degrees

F(40degreesC),orincinerate.Followthe

manufacturer’sinstructions.

Thispowerunitisintendedtobecorrectlyorientated

inaverticaloroormountedposition.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedinChina

AllRightsReserved

*3424-963*A

Main Page

Need help?

Do you have a question about the Toro 88500 and is the answer not in the manual?

Summary

Safety

California Proposition 65 Warning

Warning regarding lead in the power cord, a chemical known to cause birth defects or reproductive harm.

Electrical Safety Precautions

Instructions to reduce the risk of fire or electric shock during use.

Battery Handling Precautions

Warnings about mistreating the battery, including risks of fire or chemical burns.

Overheating Battery Risks

Information on risks associated with overheating batteries, such as fire and severe burns.

Safety and Instructional Decals

Decal Information

Details and explanations of safety and instructional decals found on the battery charger and battery.

Charging the Battery Pack

LED Indicator Guide

Explanation of the LED indicators on the battery charger for charging status and battery condition.

Inserting the Battery into the Trimmer

Battery Insertion Procedure

Step-by-step instructions on how to correctly insert the battery pack into the trimmer.

Battery Pack Preparation For Recycling

Battery Recycling Instructions

Guidance on preparing the battery pack for recycling and important warnings about its disposal.

Troubleshooting

Battery Performance Issues

Information on troubleshooting battery operational time reduction due to heat or moisture.

California Proposition 65 Warning Information

Understanding California Proposition 65

Detailed explanation of California's Proposition 65 warning requirements and their implications.

Toros Prop 65 Warning Policy

Explanation of why Toro includes Proposition 65 warnings, even for negligible exposure levels.

The Toro 20V Max Li-Ion Battery and Battery Charger (Models 88500 and 88502) is a power system designed for use with Toro 20V Max tools. This system includes a battery charger and a lithium-ion battery pack, providing portable power for various applications.

Function Description:

The battery charger (Model 88500) is designed to recharge Toro 20V Max lithium-ion battery packs. It converts AC input power into DC output power suitable for charging the battery. The charger features LED indicators to communicate the charging status, including whether the battery is charging, fully charged, or too warm to charge. It also incorporates backfeed protection to prevent energy flow back into the power source.

The lithium-ion battery pack (Model 88502) provides a portable power source for compatible Toro 20V Max tools. It is designed for easy insertion and removal from tools and the charger. The battery pack includes LED indicators to show its current level of charge, allowing users to monitor power availability.

Important Technical Specifications:

Battery Charger (Model 88500):

Input: 100-120V AC, 50-60Hz, 70W
Output: 18V MAX* DC 2.6A
Nominal Voltage (under workload): 18V DC
Charging Temperature Range: 0°C to 40°C (32°F to 104°F)
Safety Certifications: UL US Listed, Class 2 Battery Charger
Features: Voltage selector switch for 120 volt position (U.S.A.) or other positions for international use, backfeed protection.

Lithium-Ion Battery (Model 88502):

Voltage: 20V MAX* DC
Energy Capacity: 36Wh
Nominal Voltage (under workload): 18V DC
Discharge Temperature Range: -15°C to 50°C (5°F to 122°F)
Safety Features: Protection against short circuits, overheating, and incineration.
Recycling: Lithium-ion batteries must be recycled or disposed of properly at a battery recycling facility.

Note: "Maximum initial voltage without workload, as rated by battery manufacturer. Under workload, nominal voltage is 18V DC."

Usage Features:

Battery Charger:

Voltage Selection: Users must ensure the voltage selector switch is set to the correct voltage position (e.g., 120 volt for U.S.A.) before plugging in. For international use, an attachment plug adapter may be required.
Charging Process: To charge, the battery pack is inserted upside down into the charger, aligning the battery terminal with the charger's slot until it clicks into place.
LED Indicators: The charger's LED indicators provide clear feedback:
- Red (Top) / Red (Bottom): Battery is charging.
- Red (Top) / Green (Bottom): Fully charged.
- Red (Top) / Orange (Bottom): Battery is too warm; remove for approximately 30 minutes to cool.
Battery Removal: To remove the battery from the charger, press the release button and slide the battery backward out of the charger.

Battery Pack:

Insertion into Tool: Align the tongue of the battery pack with the cavity in the tool's handle housing and push until the latch locks into place.
Charge Level Indicators: The battery pack itself has LED indicators to show its current charge level.
Initial Charge: Battery packs are not fully charged when purchased and should be charged until the LED indicators turn green before first use.
Storage: For prolonged storage, the battery should be removed from the tool.
Overheat Protection: The battery will automatically stop working if it overheats to prevent damage. It should be removed from the tool and allowed to cool before reuse.
Moisture Protection: If moisture is present on the battery leads, it can cause tool malfunction. The battery should be dried before use.

Maintenance Features:

Battery Pack Preparation for Recycling:

Terminal Protection: Upon removal for recycling, the battery pack's terminals should be covered with heavy-duty adhesive tape to prevent short circuits.
No Disassembly: Users are warned not to destroy or disassemble the battery pack or remove any of its components.
Proper Disposal: Lithium-ion batteries must be recycled or disposed of properly at the nearest battery recycling facility, adhering to manufacturer's instructions and local regulations.

General Safety and Troubleshooting:

Overheating: If the battery is too warm, the charger will indicate this, and the battery should be removed and allowed to cool. Using a hot battery can reduce operating time.
Moisture: Ensure the battery is dry before placing it into a tool or charger to prevent malfunction.
Proposition 65 Warning: The product's power cord contains lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Users are advised to wash hands after handling.
Fire/Chemical Burn Risk: Do not disassemble, heat above 40°C (104°F), or incinerate the battery. Replace batteries only with Toro genuine batteries to avoid fire or explosion risks.
Disposal of Used Battery: Dispose of used batteries promptly and keep them away from children.
Charger Orientation: The power unit (charger) is intended to be correctly oriented in a vertical or floor-mounted position.