Toro CCR POWERLITE 38182 - Folding Handle for Storage; Folding Discharge Chute and Handle

Folding the Handle
1. R emo v e the knob from the rear of the disc harg e c hute .
2. F old the disc harg e c hute do wn and install the knob
tightly onto the bolt at the rear of the disc harg e c hute
handle ( Figure 12 ).
Figure 12
3. Loosen the knobs on the handle and fold the handle
do wn o v er the sno wthro w er .
Note: Y ou can car r y the folded sno wthro w er b y its
disc harg e c hute handle .
10