22
Station Settings
Station Settings allows you to set parameters specic to each station.
• Use the Up or Down Arrows to navigate through the menus.
• Use the Left and Right Arrow Keys to advance to the next entry eld on the same menu line.
• Use the Input Dial to select values when editing.
Command Function
DB1 or 2 Select the daughterboard.
S01 Select the station you want to edit in this eld. Choose from Station 01 through the gateway maximum
station count of 500 (per daughterboard).
Sched Today: Total scheduled station runtime for the current irrigation day.
Water Today: Total station runtime that has occurred for the current irrigation day.
Runtime resulting from a station that is manually activated via the output hardware switch will not
be captured.
Water Yestr: Total station runtime that occurred for the previous irrigation day.
Runtime resulting from a station that is manually activated via the output hardware switch will not
be captured.
Disable: Disable station operation by selecting Yes.
Resume station operation by s electing No.
S016 100% 1STSTLAWN
Decoder Addr: 38684
Dec Sta: 4 Board: 1
Disable: No
Hold: Use this menu item to delay operation for this station. Select the hold duration from 01–30 days,
Permanent or None. is option is useful when a specic station needs to be deactivated without
aecting any of the programs. is does not aect manual starts from the front panel.
Capacitor
Voltage
Must be set to 15V only.
Dec Addrss: Shows the 5-character address of the decoder module, is downloaded from Lynx.
Dec Oset: Shows the ouput number (1,2,3, or 4), is downloaded from Lynx.
To Next Page
Loading...
