Toro GrandStand 74550 - Operating the Ignition Switch; Using the Speed Control Lever; Using the Fuel Shut-Off Valve

G008959
1
2
Figure11
1.On2.Off
OperatingtheIgnitionSwitch
1.TurntheignitionkeytotheStartposition
(Figure12).Whentheenginesstarts,releasethekey.
Important:Donotengagestarterformore
than5secondsatatime.Iftheenginefails
tostartallowa15secondcool-downperiod
betweenattempts.Failuretofollowthese
instructionscanburnoutthestartermotor.
Note:Additionalstartingcyclesmayberequired
whenstartingtheengineforthersttimeafterthe
fuelsystemhasbeenwithoutfuelcompletely.
START
RUN
ST OP
G008947
Figure12
2.Turntheignitionkeytostoptostoptheengine.
UsingtheSpeedControl
Lever
Thismachinehasaspeedcontrolleverthatsets
themaximumgroundspeedofthemachine.This
canbeadjustedtotheoperator’sdesiredspeed.It
isrecommendedtousetheslowestspeedfornew
operator’s.
1.Movethespeedcontrollevertosetthedesired
speed.
•Fullforwardhasquickresponseandmaximum
speed.
•Fullrearwardhassmoothresponseandslower
speed.
2.Movethecontrolleverstodrivethemachine.The
controlleversmaybepushedforwardtothefront
referencebarwhilethespeedofthemachineis
controlledbythespeedcontrollever.
Figure13
UsingtheFuelShut-OffValve
Closethefuelshut-offvalvefortransport,maintenance,
andstorage(
Figure14).
Ensurethefuelshut-offvalveisopenwhenstarting
theengine.
17