Toro GrandStand 74583 User Manual

Toro GrandStand 74583

68 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

FormNo.3390-206RevA

GrandStand

®

Mower

With48in,52in,or60inTURBOFORCE

®

CuttingUnit

ModelNo.74583—SerialNo.315000001andUp

ModelNo.74588—SerialNo.315000001andUp

ModelNo.74589—SerialNo.315000001andUp

ModelNo.79589—SerialNo.315000001andUp

g017600

Registeratwww.Toro.com.

OriginalInstructions(EN)

*3390-206*A

Table of Contents

Questions and Answers:

D
danielwrightSep 8, 2025
What to do if the cutting blades of my Toro GrandStand 74583 Lawn Mower do not rotate?
- M
  Mario RobinsonSep 8, 2025
  If the cutting blades on your Toro Lawn Mower do not rotate, check the drive belt for wear, looseness, or breakage and verify its tension. Ensure the drive belt is properly on the pulley, checking the adjusting shafts and belt guides. Also, inspect the mower deck belt for wear, looseness, or breakage, replacing it if necessary. Make sure the mower deck belt is correctly positioned on the pulley, and check the idler pulley, idler arm, and spring for proper function. Replace the idler spring if it is broken or missing.
G
Gina NguyenSep 12, 2025
Why won't my Toro GrandStand 74583 Lawn Mower drive?
- M
  Maria GravesSep 12, 2025
  If your Toro Lawn Mower won't drive, it could be due to a few reasons. First, check if the bypass valve is not closed tight and tighten it. The drive or pump belt might be worn, loose, or broken, or it could be off a pulley, in which case you should change the belt. Also, the idler spring could be broken or missing, so replace the spring. Finally, the hydraulic fluid level might be low or too hot; add hydraulic fluid to the reservoir or let it cool down.
L
laura18Sep 12, 2025
Why is my Toro GrandStand 74583 Lawn Mower engine overheating?
- Y
  ywalkerSep 12, 2025
  If your Toro Lawn Mower engine is overheating, consider these factors: the engine load might be excessive, so reduce the ground speed. Also, check the oil level in the crankcase and add oil if it's low. Additionally, make sure the cooling fins and air passages above the engine are clear of any obstructions; if plugged, remove the obstruction.
D
David FernandezSep 14, 2025
What to do if my Toro GrandStand 74583 Lawn Mower does not drive?
- P
  Peter StoneSep 14, 2025
  If your Toro Lawn Mower machine does not drive, first ensure that the bypass valve is tightened. If not, tighten the bypass valve. Next, inspect the drive or pump belt for wear, looseness, or breakage and change the belt if needed. Also, if the drive or pump belt is off a pulley, change the belt. A broken or missing idler spring can also cause this issue, so replace the spring. Lastly, check the hydraulic fluid level; if it's low, add hydraulic fluid to the reservoir, or if it's too hot, let it cool down.

Toro GrandStand 74583 Specifications

General

Engine Displacement	726 cc
Cutting Width	52 inches
Deck Material	7-gauge high-strength steel
Spindle Material	Cast Iron
Drive System	Hydrostatic
Speed	10 mph
Blade Tip Speed	18, 500 ft/min
Cutting Height	1.5 - 5 inches
Ground Speed (Forward)	10 mph (16.1 km/h)
Warranty	3-year limited

Related product manuals

Preview: Toro GrandStand 74589

Toro GrandStand 74589

Preview: Toro GrandStand 74534

Toro GrandStand 74534

Preview: Toro GrandStand 74574

Toro GrandStand 74574

Preview: Toro GrandStand 74558

Toro GrandStand 74558

Preview: Toro GrandStand 74549

Toro GrandStand 74549

Toro GrandStand 74578

Toro GrandStand 74550

Preview: Toro GrandStand 74504

Toro GrandStand 74504

Preview: Toro GrandStand 74567TE

Toro GrandStand 74567TE

Preview: Toro GrandStand 74534TE

Toro GrandStand 74534TE

Preview: Toro GrandStand 74504TE

Toro GrandStand 74504TE

Preview: Toro 74534TE GrandStand

Toro 74534TE GrandStand