Kickstand (continued)
G404706
Kickstand—CUTTING-UNIT SERVICE
position
Spring pin
Specifications
Note: Specifications and design are subject to change without notice.
Model 04850 Model 04860
Width
84 cm (33 inches) 91 cm (36 inches)
Dry weight* 84 kg (185 lb) 86 kg (190 lb)
Width of cut
46 cm (18 inches) 53 cm (21 inches)
Height of cut Refer to your cutting unit Operator’s Manual.
Clip Dependent on reel speed and reel-drive-pulley position.
Engine speed Low idle: 1,900 ± 100 rpm; High idle: 3,450 ± 100 rpm
Mowing speed 3.2 km/h (2 mph) to 5.6 km/h (3.5 mph)
Transport speed 8.5 km/h (5.3 mph)
*Traction unit only. Refer to the cutting unit Operator’s Manual for the weight of each cutting unit.
Product Overview: Specifications Page 4–9 3460-887 A
To Next Page
Loading...
