Toro Groundsmaster 3400 - Page 3

g014450
Figure4
1.Transmissionbypassvalve
Note:Themachineisnowinafreewheel
conditionandcanbetowedforashortdistance
atslowspeed.
8.Removethewheelchocksbeforetowingthe
machine.
ReturningtheMachine
totheNormalWorking
Condition
1.Chockthefrontwheels.
2.Closethebypassvalveonthetransmission
pumpbyturningitclockwise.
3.Commissionthefrontwheelmotordiscbrakes
asfollows:
Important:Checkandensurethatno
contaminationgetsintothemotorthrough
thegapwhentheendcoverhasbeen
released.
A.UsingaM6hexbitandatorquewrench,
torquetheendcoverboltsinastarcross
patternto14to16N∙m(10to12ft-lb);refer
toFigure2.
B.Ensurethattheendcoverisushwiththe
brakehousing.
C.Repeatthisprocedureforbothfrontwheel
motors.
4.Removethewheelchocks
5.Disconnectthetowbar.
Note:Thebrakingsystemnowoperatesinthe
normalway.
3