The engine overheats.
Possible Cause Corrective Action
The engine load is excessive. Reduce the ground speed.
The oil level in the crankcase is low. Add oil to the crankcase.
The cooling fins and air passages under the
engine blower housing are plugged.
Remove the obstruction from the cooling
fins and air passages.
The machine does not drive.
Possible Cause Corrective Action
The hydraulic-fluid in the transmission is
low.
Add hydraulic fluid to the hydraulic fluid
expansion tank in the tower.
Air is in the hydraulic system. Bleed the air out the hydraulic system.
A drive belt slipped. Replace the pump-drive belt.
A drive belt idler spring is missing. Replace the pump-drive belt idler spring.
The bypass valves are in the tow position. Turn the bypass valves to the drive position.
3451-705A Page 7–2 Troubleshooting: Storage Safety
To Next Page
Loading...
