EasyManua.ls Logo

Toro Power Max 926 OXE - User Manual

Toro Power Max 926 OXE
32 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
FormNo.3369-555RevC
PowerMax926/928/1028OXESnowthrower
ModelNo.38661—SerialNo.312000001andUp
ModelNo.38662—SerialNo.312000001andUp
ModelNo.38663—SerialNo.312000001andUp
Operator'sManual
Introduction
Thismachineisintendedtobeusedbyresidential
homeownersorprofessional,hiredoperators.Itis
designedforremovingsnowfrompavedsurfaces,
suchasdrivewaysandsidewalks,andothersurfaces
fortrafconresidentialorcommercialproperties.
Itisnotdesignedforremovingmaterialsother
thansnow,norisamodelwithapivotingscraper
designedforclearingoffgravelsurfaces.
Readthisinformationcarefullytolearnhowtooperate
andmaintainyourmachineproperlyandtoavoidinjury
andmachinedamage.Youareresponsibleforoperating
themachineproperlyandsafely.
YoumaycontactTorodirectlyatwww.Toro.comfor
machineandaccessoryinformation,helpndinga
dealer,ortoregisteryourmachine.
Wheneveryouneedservice,genuineToroparts,
oradditionalinformation,contactanAuthorized
ServiceDealerorToroCustomerServiceandhave
themodelandserialnumbersofyourmachineready.
Figure1identiesthelocationofthemodelandserial
numbersonthemachine.Writethenumbersinthe
spaceprovided.
ST
OP
G016493
1
Figure1
1.Modelandserialnumberlocation
ModelNo.
SerialNo.
Thismanualidentiespotentialhazardsandhassafety
messagesidentiedbythesafetyalertsymbol(Figure2),
whichsignalsahazardthatmaycauseseriousinjury
ordeathifyoudonotfollowtherecommended
precautions.
Figure2
1.Safetyalertsymbol
Thismanualuses2wordstohighlightinformation.
Importantcallsattentiontospecialmechanical
informationandNoteemphasizesgeneralinformation
worthyofspecialattention.
ThissparkignitionsystemcomplieswithCanadian
ICES-002.
©2012—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved

Table of Contents

Questions and Answers

  • E
    Earl LambertAug 1, 2025
    Why my Toro Power Max 926 OXE engine does not start?
    • R
      randallgutierrezAug 1, 2025
      To address the issue of your Toro Snow Blower not starting or starting with difficulty, verify the key is correctly inserted and in the On position. Ensure the choke is On and the primer is pressed 3 times. Check that the fuel shutoff valve is open and the throttle is in the Fast position. Also, ensure the fuel tank has fresh gasoline, the spark plug wire is connected, and the spark plug is in good condition with the correct gap. Finally, verify the fuel vent cap isn't restricted and the engine oil level is correct.
  • S
    Shawn OconnorAug 5, 2025
    How to fix rough running engine on Toro Snow Blower?
    • J
      Jennifer MartinAug 6, 2025
      If your Toro Snow Blower runs rough, ensure the choke is in the Off position and the fuel shutoff valve is fully open. Use fresh gasoline in the fuel tank. Check that the spark plug wire is securely connected and the spark plug is in good condition with the correct gap. Also, verify that the engine oil level in the crankcase is at the Full mark on the dipstick.
  • N
    nguyensamanthaAug 11, 2025
    What to do if my Toro Snow Blower does not discharge snow properly?
    • R
      Ross ThompsonAug 11, 2025
      If your Toro Snow Blower isn't discharging snow well, ensure the throttle is in the Fast position and shift to a lower gear. Reduce the amount of snow you're trying to clear per pass, and avoid overloading the machine with heavy, wet snow. Check for and clear any blockage in the discharge chute. Inspect the auger/impeller drive belt; make sure it is properly installed and adjusted.
  • M
    mccormickmelanieAug 15, 2025
    How to troubleshoot electric starter that does not turn on Toro Power Max 926 OXE?
    • T
      tammy42Aug 16, 2025
      If the electric starter on your Toro Snow Blower isn't turning, first, make sure the power cord is securely connected to both the outlet and the machine. If the cord is damaged, replace it. If the outlet isn't working, have a qualified electrician check it.
  • K
    Kevin LopezAug 21, 2025
    Why Toro Power Max 926 OXE Snow Blower does not properly clear the snow off the surface?
    • R
      raymonddouglasAug 22, 2025
      To resolve the issue of the Toro Snow Blower not properly clearing snow, adjust the skids and/or scraper. Ensure that the tire pressure is equal in both tires.
  • S
    Sandra CampbellAug 26, 2025
    What to do if discharge chute does not lock on Toro Power Max 926 OXE Snow Blower?
    • T
      Tiffany WilliamsAug 27, 2025
      Adjust the discharge chute latch on your Toro Snow Blower to ensure it locks into place and moves correctly.

Summary

Introduction

Safety

Before Operating

Understand manual, controls, and quick engine stop procedures.

Preparation

Inspect area, clear debris, wear proper clothing, handle fuel safely.

Clearing a Clogged Discharge Chute

Procedure to safely clear snow blockages using the cleanout tool.

Toro Snowthrower Safety

Specific safety information and warnings for Toro snowthrowers.

Setup

Loose Parts

Chart to verify all shipped parts for assembly and use.

Installing the Upper Handle

Step-by-step guide to attach the upper handle to the snowthrower.

Installing the Traction Control Linkage

Steps to connect the traction control linkage for proper operation.

Installing the Chute Control Rod

Guide to installing the control rod for the discharge chute.

Operation

Filling the Fuel Tank

Safe procedures for filling the fuel tank with gasoline.

Starting the Engine

Step-by-step guide to start the snowthrower engine, including fuel and choke settings.

Stopping the Engine

Instructions on how to safely shut down the snowthrower engine.

Operating the Traction Drive

How to engage and disengage the machine's drive system.

Operating the Speed Selector

Guide to using the speed selector for 6 forward and 2 reverse gears.

Operating the Auger;Impeller Drive

How to engage and disengage the auger and impeller for snow clearing.

Moving the Discharge Chute

Instructions for directing the snow discharge using the Quick Stick control.

Unclogging the Discharge Chute

Procedure to safely clear a clogged discharge chute.

Operating Tips

General advice for safe and effective snowthrower operation.

Maintenance

Recommended Maintenance Schedule(s)

Overview of maintenance tasks and their recommended service intervals.

Checking the Engine Oil Level

Procedure for verifying and topping up engine oil before operation.

Checking and Adjusting the Skids

Ensuring proper skid adjustment for auger clearance and scraper height.

Checking and Adjusting the Auger;Impeller Cable

Procedure to adjust the auger/impeller cable for correct operation.

Changing the Engine Oil

Steps for draining and refilling the engine oil.

Replacing the Spark Plug

Instructions for safely removing and replacing the spark plug.

Replacing the Headlight Bulb

Procedure for safely replacing the snowthrower's headlight bulb.

Storage

Preparing the Machine for Storage

Steps to take to prepare the snowthrower for long-term storage.

Troubleshooting

California and Federal Exhaust and Evaporative Emission Control Warranty Statement

Your Warranty Rights and Obligations

Explains owner's rights and responsibilities regarding emission control warranty.

The Toro Total Coverage Guarantee

Conditions and Products Covered

Lists products covered and warranty periods for residential and commercial use.

Toro Power Max 926 OXE Specifications

General IconGeneral
BrandToro
ModelPower Max 926 OXE
CategorySnow Blower
LanguageEnglish

Related product manuals