Toro PowerCurve 1800 - Starting and Stopping the Motor; Motor Operation Instructions; Adjusting the Discharge Chute and Chute Deflector; Chute and Deflector Adjustment

StartingandStoppingthe
Motor
1.Tostartthemotor,inserttheinterlockbutton(key),press
andholdtheinterlockbutton(key),andsqueezethepower
controlbartothehandle(Figure10).
g017930
Figure10
1.Interlockbutton(key)
2.Powercontrolbar
Note:Youmayreleasetheinterlockbutton(key)afteryou
squeezeandholdthepowercontrolbartothehandle.
2.Tostopthemotor,releasethepowercontrolbar.
Note:Whenyoustopthemachineafteryouhavenished
removingthesnow,alsoremovetheinterlockbutton(key)
anddisconnecttheextensioncord.
AdjustingtheDischarge
ChuteandChuteDeector
Toadjustthedischargechute,movethehandleonthechute
controlrodinthedirectionthatyouwishtodirectthesnowstream
(Figure6andFigure7).
Toadjustthechutedeector(andthereforetheheightofthesnow
stream),squeezethetriggerandraiseorlowerthechutedeector
(Figure11).
g013461
Figure11
1.Chutedeectortrigger
WARNING
Agapbetweenthedischargechuteandthechute
deectormayallowthemachinetothrowsnowand
objectsinthedirectionoftheoperator.Thrownobjects
couldcauseseriouspersonalinjury.
•Donotforcethechutedeectortoofarforwardso
thatagapappearsbetweenthedischargechute
andchutedeector.
•Donotadjustthechutedeectorwiththepower
controlbarengaged.Releasethepowercontrolbar
beforeadjustingthechutedeector.
7