2. Filling the Engine with Oil
Y our mo w er does not come with oil in the engine , but it
does come with a bottle of oil.
1. R emo v e the dipstic k ( Figure 5 ).
Figure 5
2. Slo wl y pour oil into the oil fill tube until the oil lev el
reac hes the Full line on the dipstic k ( Figure 5 ). Do not
o v erfill. (Max. fill: 20 oz., type: SAE 30W deterg ent
oil with an API ser vice classification of SF , SG , SH, SJ ,
SL, or higher .)
3. Install the dipstic k securely .
Important: Change the engine oil after the fir st 2
operating hour s ; change it y ear l y ther eafter . R efer
to Changing the Engine Oil.
Product Overview
Figure 6
1. Cutting height lever 6. Fuel tank cap
2. Oil ll/Dipstick 7. Air lter
3. Recoil start handle 8. Washout port
4. Blade control bar
9. Primer
5. Self-propel drive bar 10. Spark plug
Figure 7
1. Grass bag 2. Side discharge chute
5
To Next Page
Loading...
