Need help?Do you have a question about the Toro Sand Pro 5020 and is the answer not in the manual?
Instructions for safe operation before starting the machine.
Guidelines for safe operation while the machine is running.
A schedule of maintenance tasks based on operating hours.
A checklist for daily maintenance and inspections.
Instructions for lubricating grease fittings, bearings, and bushings.
Steps for changing the engine oil and oil filter.
How to inspect and service the engine's air cleaner.
Instructions for cleaning and maintaining the remote air cleaner.
Procedure for changing hydraulic oil and filter.
Steps for charging the hydraulic system after component replacement.
How to adjust the traction cam for correct neutral position.
How to adjust the traction interlock switch for safety.
Procedure for checking and topping up engine oil level.
Safe procedures for filling the fuel tank with gasoline.
Steps to check the hydraulic fluid level and appropriate oils.
Details the operation of the traction pedal for movement and stopping.
Step-by-step guide for starting and stopping the engine.
To Next Page
General
