5
3353-550 Rev A
3. Rotate the handle rearward.
m-8109
A.
B.
m-8110
4. Attach the
handle brackets
(A) to the lower
handle sides.
Note: Insert a
lock washer
between each
bracket and
knob, and
tighten the
lower handle
knob as tight as
you can by
hand.
A
m-8097
Filling the Engine with Oil
Important: Your mower does not come with oil in the
engine.
1. Remove the dipstick.
m-8099/m-5571
m-8098
2. Slowly pour oil into the oil fill tube until the oil
level reaches the Full line on the dipstick. Do not
overfill. (Max. fill: 20 oz., type: SAE 30W detergent
oil with an API service classification of SF, SG, SH,
SJ, SL, or higher.)
3. Install the dipstick securely.
Important: Change the engine oil after the first
5 operating hours; change it yearly thereafter. Refer
to Changing the Engine Oil on page 11.
To Next Page
Loading...
