g467171
Figure 2
1. Jack pin 2. Jack
4. Use the jack to raise the machine to the desired
height.
W ARNING
Raising the machine could cause a fuel
leak.
• Check for any fuel leaks before
performing maintenance.
• If you see a fuel leak, immediately
lower the machine and do not attempt
to start the engine. A void creating a
source of ignition until the fuel vapors
have dissipated.
5. Support the machine with jack stands; refer to
the machine Operator ’ s Manual for jack stand
placement.
6. When nished, use the jack to lower the
machine, then remove the jack.
Note: Do not operate the machine with the jack
attached.
3
To Next Page
Loading...
Need help?
General
