Toro Pro Force Groundsmaster 3280-D User Manual

FormNo.3434-904RevA
ProForce
®
DebrisBlowerMountingKit
Groundsmaster
®
3280-DTractionUnit
ModelNo.30493
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescription
Qty.
Use
1
Nopartsrequired
–
Removethecuttingunitfromthelift
arms.
Bolt(3/8–16x1–3/4inches)
2
Locknut(3/8–16inch)
2
CVdriveshaft
1
2
Rollpin(3/16x2–1/4inches)
1
ReplacetheCVshaft.
Bolt(1/2–13x3/4inches)
2
Lockwasher(1/2inch)
2
Flatwasher(9/16x1–3/8inches)
2
Hairpincotter2
Clevispin(5/16x1–22/25inches)
2
Supportrod
2
Bolt(1/2–13x1inch)
2
Clevispin
2
Bolt(3/8–16x1–3/4inches)
2
Locknut(3/8–16inch)
2
Rollpin(3/16x2–1/4inches)
1
3
Attachmentframe
1
Mounttheattachmentframetothelift
arms.
Drive-shaftassembly
1
Rollpin1
Bolt(5/16x1-3/4inches)
2
4
Locknut(5/16inch)
2
Installthedriveshafttotheblower
gearboxshaft.
Mountingplate1
Bolt(1/2x1-1/4inches)
4
5
Locknut(1/2inch)
4
Installthemountingplatetothedebris
blowerframe.
Debris-blowerassembly1
Lockingpin1
6
Hairpincotter1
Mounttheblowertothetractionunit.
Consolewiringharness
1
Blowerwiringharness1
Cabletie
10
Switch
1
Fuse1
7
Fuseblock1
Routethewireharness.
©2019—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3434-904*A

Toro Pro Force Groundsmaster 3280-D Specifications

General

Brand	Toro
Model	Pro Force Groundsmaster 3280-D
Category	Lawn Mower Accessories
Language	English

Summary

Installation

Loose Parts

Verify all parts have been shipped using the provided chart.

Removing the Cutting Unit from the Lift Arms

Procedure to detach the cutting unit from the tractor's lift arms.

Replacing the CV Shaft

Steps for removing the old and installing the new CV drive shaft.

Mounting the Attachment Frame to the Lift Arms

Instructions to attach the main frame to the tractor's lift arms.

Installing the Drive Shaft to the Blower Gearbox Shaft

Guide to connect the drive shaft assembly to the blower gearbox.

Installing the Mounting Plate to the Debris Blower Frame

Details on attaching the mounting plate to the blower frame.

Mounting the Debris Blower to the Traction Unit

Steps for securing the debris blower assembly onto the traction unit.

Routing the Wiring Harness

Instructions for connecting and securing the electrical wiring harnesses.

Product Overview

Controls

Overview of the control panel and specific switches for operation.