Form No. 3468-340 Rev A
34in, 42in, 50in, 54in, and 60in Bagger Kit
Zero-T urn-Radius Riding Mower
Model No. 79410 —Serial No. 415262195 and Up
Model No. 7941 1 —Serial No. 415270000 and Up
Model No. 79412 —Serial No. 415257000 and Up
Model No. 79413 —Serial No. 415270000 and Up
Model No. 79417 —Serial No. 415270000 and Up
Operator's Manual
Introduction
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. Y ou are responsible for
operating the product properly and safely .
Whenever you need service, genuine parts, or
additional information, contact an Authorized Service
Dealer or Customer Service and have the model
and serial numbers of your product ready . Figure 1
identies the location of the model and serial numbers
on the product. W rite the numbers in the space
provided.
g005673
Figure 1
1. Model and serial number location
Model No.
Serial No.
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
The safety-alert symbol ( Figure 2 ) appears both in
this manual and on the machine to identify important
safety messages that you must follow to avoid
accidents. This symbol will appear with the word
Danger , W arning , or Caution .
• Danger indicates an imminently hazardous
situation which, if not avoided, will result in death
or serious injury .
• W arning indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury .
• Caution indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury .
sa-black
Figure 2
1. Safety-alert symbol
© 2024—The T oro® Company
81 1 1 L yndale A venue South
Bloomington, MN 55420
Register at www .T oro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3468-340*
To Next Page
Need help?
General
