Why is the bagging performance reduced in my Toro E-Z Vac DFS 78556?
Reduced bagging performance in your Toro Lawn Mower Accessories can be due to several factors. Always operate the collection system at full throttle. Remove any debris, leaves, or grass clippings from the screen in the bagger hood. Replace the blower belt if it is loose. Locate and remove any plugged debris in the tube or blower, and empty the bagger if it is full.
Why do my Toro E-Z Vac DFS 78556 Lawn Mower Accessories blower and tubes plug too frequently?
To prevent frequent clogging of the blower and tubes in your Toro Lawn Mower Accessories, ensure you dump the bagger more frequently and always operate the collection system at full throttle. Cut grass when it is dry, and avoid cutting more than 51 to 76 mm (2 to 3 inches) or 1/3 of the grass height. Remove any debris, leaves, or grass clippings from the screen in the bagger hood. Drive slower at full throttle and replace the blower belt if it is worn.
What to do if my Toro E-Z Vac DFS 78556 Lawn Mower Accessories has abnormal vibration?
Abnormal vibration in your Toro Lawn Mower Accessories can be caused by several issues: * Bent or unbalanced cutting blade(s): Install new cutting blade(s). * Loose blade-mounting bolt: Tighten the blade-mounting bolt. * Loose blower pulley or pulley assembly: Tighten the appropriate pulley. * Worn blower belt: Replace the blower belt. * Bent or unbalanced blower fan blade(s): Contact an Authorized Service Dealer.
How to prevent debris blow out from Toro E-Z Vac DFS 78556 Lawn Mower Accessories?
Debris blow out from your Toro Lawn Mower Accessories can happen if the bagger is too full, so dump the bagger more frequently. Also, reduce your ground speed by driving slower at full throttle. Finally, ensure the mower deck is level; refer to the Operator's Manual for the machine for instructions on leveling the mower deck.
What to do if the blower impeller does not spin freely on Toro Lawn Mower Accessories?
If the blower impeller on your Toro Lawn Mower Accessories does not spin freely, first remove any debris, leaves, or grass clippings from the blower impeller. If the impeller is still not aligned, contact an Authorized Service Dealer.
General| Brand | Toro |
|---|---|
| Model | E-Z Vac DFS 78556 |
| Category | Lawn Mower Accessories |
| Language | English |
Guidelines for safely towing equipment and handling trailer loads.
Procedures for installing bagger mounting brackets and handle assembly.
Steps for mounting the blower assembly and connecting discharge tubes.
Instructions for adding counterweights for stability when using the bagger.
Steps to install the grass deflector onto the mower.
To Next Page