Toro Pro Force Groundsmaster 3280-D - Mounting the Debris Blower to the Traction Unit

Note:Usethelowersetofholesoneachside
ofthemountingplatewheninstallingtheplate.
3.Torquetheboltsto92to113N⋅m(68to82ft-lb).
g021677
Figure6
1.Mountingplate
3.Locknut(4)
2.Bolt(4)
6
MountingtheDebrisBlower
totheTractionUnit
Partsneededforthisprocedure:
1Debris-blowerassembly
1Lockingpin
1Hairpincotter
Procedure
1.Removeanyattachmentfromthefrontofthe
machine.
2.Movethetractionunitintopositionbehindthe
attachmentadapter.
3.Raisethetractionunitadapterintothe
attachmentadapter.
Note:Ifthejackstandisraisedslightlyhigher
thanthecastors,theadapteriseasiertoinstall.
4.Insertthelockingpinthroughtheadaptersand
secureitwithahairpincotter(Figure7).
g023910
Figure7
1.Lockingpin2.Hairpincotter
5.Installthedriveshafttothequick-attachframe
byslidingthequickcouplerontotheshaft
(Figure8).
g021678
Figure8
1.Driveshaft2.Quick-attach-frameshaft
6.Securethesafetychaintothequick-attach
frame(Figure8).
6