Toro TimeCutter HD MyRide 48in - Anti-Scalp Roller and Attachment Use; Adjusting the Anti-Scalp Rollers; Using Approved Attachments and Accessories

AdjustingtheAnti-Scalp
Rollers
Wheneveryouchangetheheight-of-cut,itis
recommendedtoadjusttheheightoftheanti-scalp
rollers.
1.Disengagetheblade-controlswitch(PTO),move
themotion-controlleverstotheNEUTRAL-LOCK
position,andengagetheparkingbrake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Adjusttheanti-scalprollersasshowninFigure
30.
g029955
g029955
Figure30
1.Anti-scalproller4.Flangenut
2.Spacer
5.Bolt
3.Bushing
UsingAttachmentsand
Accessories
UseonlyToroapprovedattachmentsandaccessories.
Ifyouattachabuckettotheengineguard,useanylon
straptosecureit.
Important:Thebucketweightimpactsthe
stabilityofthemachine.Ifyouarecarryingmore
thantheweightlistedinthetablebelowina
bucketattachedtotheengineguard,youmust
equipyourmachinewiththeBucket-SupportKit.
ContactyourauthorizedToroservicedealer.
ModelMaximumweightperbucket
withouttheBucket-Support
Kit
48-inchdeck
1.1kg(2.5lb)
54-inchdeck
1.1kg(2.5lb)
60-inchdeck
4.5kg(10lb)
27