Replacing the Mower Belt (continued)
G454314
Deck pulley
Mower belt
Engine pulley
Idler pulley
Spring
Spring-removal tool
7. Roll the belt off the pulleys.
8. Route the new belt around the engine pulley and mower pulleys.
9. Use the spring-removal tool to install the idler spring over the deck hook and place
tension on the idler pulley and the mower belt.
10. Tighten the nut securing the wire form to the idler pulley.
Note: Position the wire form against the idler arm.
11. Install the pulley covers.
3466-517A Page 5–24 Maintenance: Belt Maintenance
To Next Page
Loading...
