Toro TimeCutter SW 3200 - Changing Engine Oil and Filter

g193541
Figure30
ChangingtheEngineOilandFilter
ServiceInterval:Aftertherst5hours
Every100hours(moreoftenunderaheavy
loadorinhightemperatures).
Every100hours(moreoftenindirtyordusty
conditions).
1.Parkthemachinesothatthedrainsideisslightly
lowerthantheoppositesidetoensurethatthe
oildrainscompletely.
2.Disengagetheblade-controlswitch(PTO)and
engagetheparkingbrake.
3.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
4.Draintheoilfromtheengine.
g029369
Figure31
5.Changetheengine-oillter(Figure32).
Note:Ensuretheoil-ltergaskettouchesthe
engine,andthenturnthelteranextra3/4turn.
30