Toro TimeCutter SW 3200 User Manual

FuelSystem
Maintenance
DANGER
Incertainconditions,fuelisextremely
ammableandhighlyexplosive.Areor
explosionfromfuelcanburnyou,others,and
candamageproperty.
•Performanyfuel-relatedmaintenance
whentheengineiscold.Dothisoutdoors
inanopenarea.Wipeupanyfuelthat
spills.
•Neversmokewhendrainingfuel,andstay
awayfromanopenameorwhereaspark
mayignitethefuelfumes.
ReplacingtheIn-LineFuel
Filter
ServiceInterval:Every100hours/Yearly(whichever
comesrst)—Checkthein-linefuel
lter.
Every200hours/Every2years(whichever
comesrst)—Replacethein-linefuellter.
Neverinstalladirtylterafterremovingitfromthe
fuelline.
1.Parkthemachineonalevelsurface,disengage
theblade-controlswitch(PTO),andengagethe
parkingbrake.
2.Shutofftheengine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
g027506
g033082
Figure37
33

Toro TimeCutter SW 3200 Specifications

General

Cutting Width	32 inches
Transmission	Hydrostatic
Spindle Bearings	Sealed
Steering Control	Dual lever
Deck Material	Steel
Blade Tip Speed	18, 000 FPM
Height of Cut	1.5 - 4.5 inches
Drive System	Rear Wheel Drive
Warranty	3 years
Fuel Capacity	3 gallons
Ground Speed Reverse	3 mph