Toro TimeMaster 21200 - Using the Self-Propel Drive; Shutting off the Engine; Engaging the Blades

1.TurntheignitionkeytotheRUNposition
(Figure17).
2.Pulltherecoilhandleslowlytotherearuntil
youfeelresistance,thenpullsharply.Allow
theropetoreturntotheengineslowly.
UsingtheSelf-PropelDrive
Tooperatetheself-propeldrive,simplywalkwithyour
handsgrippingtheupperhandleandyourelbowsat
yoursides,andthemachinewillautomaticallykeep
pacewithyou(Figure18).
Note:Youcanself-propelthemachinewiththe
bladesengagedordisengaged.
g193359
Figure18
Note:Usethetraction-assisthandleinsituations
whenyouneedmorecontrolthanyouhavewiththe
self-propeldrivealone.
ShuttingOfftheEngine
StandardModel
Pressthetoggleswitch(Figure19)totheSTOP
positionandholdituntiltheengineshutsoff.
g017636
Figure19
1.Toggleswitch
Electric-StartModel
1.TurntheignitionkeytotheOFFposition(Figure
20).
g017517
Figure20
2.Whentheengineshutsoff,removetheignition
keyandtakeitwithyouwhenyouleavethe
machine.
EngagingtheBlades
Whenyoustartyourengine,thebladesdonotturn.
Youmustengagethebladestomow.
1.Pulltheblade-control-barlockbacktothe
blade-controlbar(Figure21).
g016484
Figure21
1.Blade-controlbarlock2.Blade-controlbar
2.Slowlypulltheblade-controlbarbacktothe
handle(Figure21).
3.Holdtheblade-controlbaragainstthehandle
(Figure22).
13