To Next PageTo Next Page
Need help?Do you have a question about the Toro TimeMaster 20199 and is the answer not in the manual?
General| Engine Displacement | 223cc |
|---|---|
| Cutting Width | 30 inches |
| Starter | Recoil |
| Deck Material | Steel |
| Mulching Capability | Yes |
| Engine | Briggs & Stratton |
| Speed | Up to 4.5 mph |
| Warranty | 3 years |
| Cutting Height | 1.25 - 4.25" (3.2 - 10.8 cm) |
| Drive System | Personal Pace® Rear-Wheel Drive |
Machine can amputate; follow safe operation, keep clear of blades and moving parts.
Keep children out of mowing area; be alert, never let them operate.
Handle gasoline with extreme care due to flammability and explosive vapors.
Operation may create sparks; spark arrester may be required by local fire agencies.
Steps to check engine oil level using dipstick and adjust by adding or draining oil.
Steps to check engine oil level using dipstick and adjust by adding or draining oil.
Pull blade-control-bar lock and bar to engage the blades for mowing.
Verify blades stop within 3 seconds of releasing the control bar.
Schedule for tasks like oil changes, filter service, and blade checks based on usage.
Steps to drain old oil, then refill with new oil using dipstick for accurate measurement.
Check cutting edges for sharpness, nicks, damage, wear, or slots.
Measure cutting edges at specific locations to check for bends using a level surface.
Install blades horizontally and perpendicularly, nest driver areas, and ensure no touching.
Prepare fuel system by running dry and adding stabilizer; lubricate engine cylinder.
