Do you have a question about the Toro 20199 and is the answer not in the manual?
Model Number | 20199 |
---|---|
Product Type | Lawn Mower |
Power Source | Gasoline |
Deck Material | Steel |
Mulching Capability | Yes |
Bagging Capability | Yes |
Side Discharge | Yes |
Start Type | Recoil |
Cutting Width | 22 inches |
Fuel Capacity | 1.0 quarts |
Drive System | Rear-wheel drive |
Explains the safety alert symbol used in the manual to signal potential hazards.
Alerts to chemicals known to cause cancer, birth defects, or reproductive harm.
Notes violation of CA law for operating on certain lands.
Provides safety instructions adapted from ANSI/OPEI standard B71.1-2012.
Offers guidance on safe and effective lawn mower operation.
Details precautions for operating the mower on slopes to prevent accidents.
Emphasizes vigilance and precautions to prevent accidents involving children.
Provides critical safety guidelines for handling gasoline and preventing fires.
Advises on safe practices for loading and securing the mower for transport.
Identifies various safety decals and their meanings for user awareness.
Alerts about potential sparks and fire hazards in dry vegetation.
Step-by-step guide for assembling the mower's handle for operation.
Instructions for charging the battery for electric-start models.
Details on how to install the blade-control bar correctly.
Specifies the type of oil and steps for filling the engine oil.
Identifies key parts of the lawn mower with corresponding numbers.
Refers to the specific page for charging the battery on electric-start models.
Safety warnings and procedures for filling the fuel tank with gasoline.
Advises on correct gasoline type and use of fuel stabilizers.
Details how to check the engine oil level before each use.
Warns about potential injury when adjusting cutting height near the blade.
Guides on adjusting the handle height for operator comfort.
Instructions for starting the engine on standard and electric-start models.
Procedures for stopping the engine on standard and electric-start models.
Explains how to operate the self-propel drive feature.
Steps to engage the mower blade for cutting.
How to check if the blade-stop system functions correctly.
Instructions for safely disengaging the mower blade.
Method to test blade stopping using newspaper.
Steps to prepare the mower for mulching grass clippings.
Guide for attaching the grass bag to collect clippings.
Warns about potential hazards from a damaged grass bag.
Steps to install the side-discharge chute for tall grass.
Offers general advice for efficient and safe mowing.
Provides guidance on cutting different grass lengths and conditions.
Outlines maintenance tasks based on service intervals.
Tips for effectively cutting leaves on the lawn.
Steps to take before performing maintenance, like disconnecting spark plug.
Instructions for cleaning or replacing the air filter.
Steps for changing the engine oil, including warming the engine.
Detailed steps for charging the battery on electric-start models.
Alerts about lead and lead compounds in batteries and handling precautions.
Steps to replace a blown fuse in electric-start models.
Instructions for removing and installing a new battery.
How to adjust the self-propel drive cable for proper operation.
Procedures for servicing the blade-drive system.
Guidance on inspecting blades for wear and replacing them.
Steps to prepare the mower for blade servicing.
How to inspect blades for sharpness, nicks, and damage.
Procedure to check if the mower blades are bent.
Steps for safely removing the mower blades.
Detailed steps for correctly installing mower blades.
How to use the washout fitting to clean the mower deck.
Guidelines for storing the machine properly.
Steps to prepare the fuel system for long-term storage.
Procedures for preparing the engine before storing the mower.
Steps to get the mower ready for use after storage.
Details the warranty coverage for Toro products.
Lists exclusions from the Toro warranty coverage.
How to get warranty service for Toro products.
Outlines the owner's duties for maintaining the product.