Toro TimeMaster 20199 User Manual

WARNING
Incorrectlyinstallingthebladescoulddamage
themachineorcauseaninjurytotheoperator
ortobystanders.
WashingUnderneaththe
Machine
ServiceInterval:Beforeeachuseordaily—Wash
underneaththemachine.
1.Movethemachinetoalevelsurface.
2.Stoptheengineandwaitforallmovingpartstostop
beforeleavingtheoperatingposition.
3.Lowerthemachinetothelowestheight-of-cut.
4.Attachahosetothewashouttting,andturnthe
wateronhigh(
Figure48).
Note:Spreadpetroleumjellyonthewashouttting
O-ringtomakethecouplingslideoneasierand
protecttheO-ring.
Figure48
1.Washouttting3.O-ring
2.Hose
4.Coupling
5.Starttheengine,engagetheblade-controllever,and
letthemachinerunfor1to3minutes.
6.Disengagetheblade-controllever,stoptheengine,
andwaitforallmovingpartstostop.
7.Shutoffthewaterandremovethecouplingfrom
thewashouttting.
Note:Ifthemachineisnotcleanafterasingle
washing,soakitandletitstandfor30minutes.Then
repeattheprocess.
8.Runthemachineagainandengagethebladesfor1
to3minutestoremovetheexcesswater.
WARNING
Abrokenormissingwashoutttingcould
exposeyouandotherstothrownobjectsorblade
contact.Contactwithabladeorthrowndebris
cancauseinjuryordeath.
•Replaceabrokenormissingwashouttting
immediately,beforeusingthemachine
again.
•Neverputyourhandsorfeetunderthe
machineorthroughopeningsinthemower.
24

Toro TimeMaster 20199 Specifications

General

Engine Displacement	223cc
Cutting Width	30 inches
Starter	Recoil
Deck Material	Steel
Mulching Capability	Yes
Engine	Briggs & Stratton
Speed	Up to 4.5 mph
Warranty	3 years
Cutting Height	1.25 - 4.25" (3.2 - 10.8 cm)
Drive System	Personal Pace® Rear-Wheel Drive