Toro TITAN 74862 - Pre-Maintenance Procedures; Raising the Seat; Lubrication; Greasing the Bearings

decal130-6996
Figure31
Locatedontheseatpanunderside
1.ReadtheOperator'sManualforinformationonmaintenance.4.Checkthehydraulicoilevery25hours
2.Checktheengineoilevery8hours5.Checkthecasterwheeltirepressureevery25hours
3.Checkthedrivewheeltirepressureevery25hours
6.Lubricatethecasterwheelevery25hours
Pre-Maintenance
Procedures
RaisingtheSeat
Makesurethemotioncontrolleversarelockedinthe
neutrallockposition.Lifttheseatforward.
Thefollowingcomponentscanbeaccessedbyraising
theseat:
•Servicedecal
•Fuses
•Batteryandcables
Lubrication
GreasingtheBearings
ServiceInterval:Every25hours—Greaseall
lubricationpoints.
GreaseType:No.2GeneralPurposeLithiumBase
Grease
1.Parkthemachineonalevelsurfaceand
disengagethebladecontrolswitch.
2.Movethemotioncontrolleversoutwardtothe
neutrallockposition,stoptheengine,remove
thekey,andwaitforallmovingpartstostop
beforeleavingtheoperatingposition.
3.Cleanthegreasettingswitharag(Figure31
andFigure32).Makesuretoscrapeanypaint
offofthefrontofthetting(s).
31