EasyManuals Logo

Toro TITAN Setup Instructions

Toro TITAN
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
3464-689C
Titan® Riding Mowers
For All Titan Riding Mowers
Setup Instructions
Connecting the Battery
1. Locate the battery and negative battery cable.
2. Remove the plastic cap from the negative battery post.
3. Remove the fasteners on the negative battery cable and use them to secure the
negative battery cable to the negative battery post.
G452546
Carriage bolt
Negative battery post
Negative battery cable
Washer
Wing nut
4. Install the previously removed plastic cap.
© 2024—The Toro
®
Company
8111 Lyndale Ave So
Bloomington, MN 55044
Register at
www.Toro.com
Original Instructions (EN)
Printed in the USA
All rights reserved
*3464-689*C

Other manuals for Toro TITAN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toro TITAN and is the answer not in the manual?

Toro TITAN Specifications

General IconGeneral
Cutting Width60 inches
Fuel Capacity5 gallons
TransmissionHydrostatic
Warranty3 years
Deck MaterialSteel
Cutting Height1.5 to 4.5 inches
Speed8.5 mph / 13.7 km/h

Related product manuals