TR50
Series
Rotor
Align the cap arrow with the left side
of the watering area. This is the non-
adjustable side of the watering arc.
Watering Arc Adjustment
Turn the arc adjustment ring to align
the white arrow to the right side of
the watering arc.
The watering area is between the cap arrow and the
adjustment ring arrow. This example is set to 180°.
Turn the adjustment ring 90° to the
left to decrease the arc.
The watering area can be adjusted between 30° and 360°.
When set to 360°, the nozzle does not reverse direction.
Instruction Guide
To Next Page
Need help?
General
