Toro TR50XT Series - User Manual

TR50XT
SERIES ROTOR
Align the cap arrow with the left side
of the watering area. This is the non-
adjustable side of the watering arc.
Turn the arc adjustment ring to align
the white arrow to the right side of
the watering arc.
The nozzle trajectory angle can be adjusted between 5° and 25°.
Turn the adjustment screw right to decrease the angle and shorten
spray radius, or left to increase the angle and lengthen spray radius.
The watering area can be adjusted between 30° and 360°.
When set to 360°, the nozzle does not reverse direction.
Instruction Guide
Watering Arc Adjustment
Nozzle Trajectory Adjustment
The watering area is between the cap arrow and the right stop
arrow on the arc adjustment ring. This example is set to 180°.
Align the right stop arrow to the right
side of the watering arc.
Right Stop Arrow
Español
English
Français Deutsch Italiano
português

Toro TR50XT Series Specifications

General

Model	TR50XT Series
Category	Irrigation System
Material	Plastic
Color	Black
Arc Adjustment	40° to 360°
Nozzle Trajectory	Low

Summary

Watering Arc Adjustment

Adjusting Watering Arc Range

Set the watering area between 30° and 360° using the cap arrow and arc adjustment ring.

Nozzle Trajectory Angle Adjustment

Adjust nozzle trajectory between 5° and 25° to control spray radius and distance.

Nozzle Replacement and Spray Adjustment

Changing Sprinkler Nozzles

Replace nozzles using the sprinkler tool or screwdriver. Pry out old nozzle and insert new one.

Adjusting Spray Radius

Turn the nozzle screw to diffuse and shorten the spray radius.

Maintenance and Flow Control

Cleaning the Sprinkler Screen

Remove and flush screen as needed. Align riser with body when reassembling.

Flow Shut Off Operation

Turn the center screw right to shut off flow, and left to open flow.

Check Valve Functionality

Install the check valve disk in position B to eliminate check valve function.