Toro TR50XT User Manual

TR50XT
SERIES ROTOR
Align the cap arrow with the left side
of the watering area. This is the non-
adjustable side of the watering arc.
Turn the arc adjustment ring to align
the white arrow to the right side of
the watering arc.
The nozzle trajectory angle can be adjusted between 5° and 25°.
Turn the adjustment screw right to decrease the angle and shorten
spray radius, or left to increase the angle and lengthen spray radius.
The watering area can be adjusted between 30° and 360°.
When set to 360°, the nozzle does not reverse direction.
Instruction Guide
Watering Arc Adjustment
Nozzle Trajectory Adjustment
The watering area is between the cap arrow and the right stop
arrow on the arc adjustment ring. This example is set to 180°.
Align the right stop arrow to the right
side of the watering arc.
Right Stop Arrow
Español
English
Français Deutsch Italiano
português

Toro TR50XT Specifications

General

Brand	Toro
Model	TR50XT
Category	Irrigation System
Language	English

Summary

Watering Arc Adjustment

Setting the Non-Adjustable Arc Side

Align the cap arrow with the left side of the watering area, which is the non-adjustable side.

Adjusting the Watering Arc Range

Turn the arc adjustment ring to adjust the watering area between 30° and 360°.

Aligning the Right Stop Arrow

Turn the arc adjustment ring to align the white arrow to the right side of the watering arc.

Nozzle Trajectory Adjustment

Adjusting Nozzle Trajectory Angle

Adjust the nozzle trajectory angle between 5° and 25° using the adjustment screw.

Changing Nozzle

Replacing the Sprinkler Nozzle

Use the tool or screwdriver to remove the old nozzle and install a new one.

Spray Adjustment

Modifying Spray Radius

Turn the nozzle screw to diffuse and shorten the spray radius.

Maintenance and Operation

Cleaning the Screen

Remove and flush the screen as needed, aligning the riser when reassembling.

Flow Shut Off Control

Turn the center screw right to shut off flow or left to open flow.

Check Valve Installation

Install the check valve disk in position B to eliminate check valve function.