Toro TurfMaster 22210 - Transmission System Maintenance; Changing the Transmission Belt; Adjusting the Transmission

g208923
Figure47
1.Markthecablehere
g208920
Figure48
1.Slack—3mm(1/8inch)
8.Torquethecable-clampscrewto11to14N∙m
(99to121in-lb)tolocktheadjustmentinplace.
9.Installthebeltcoverwiththe4boltsthatyou
removedinstep3.
10.Connectthewiretothesparkplug.
11.Checktheoperationoftheblade-brakeclutch;
refertoServicingtheCuttingBlades(page22).
ChangingtheTransmission
Belt
ServiceInterval:Every250hours
1.Shutofftheengineandwaitforallmovingparts
tostop.
2.Disconnectthewirefromthesparkplug.
3.Removethe4boltsthatholdthebeltcoverto
themachinehousing.
Note:Savetheboltsforinstallingthebeltcover
tothemachinehousing.
4.Removethebeltcover.
5.Removeanydebrisfromunderthebeltcover.
6.Loosenthebracketandrotatethebracket
forward(Figure49).
Note:Thebracketpreventsthetransmission
fromtippingtothepointwherethetransmission
beltcomesoff.
g196531
Figure49
1.Transmissiontension
spring
4.BBCbelt
2.Bracket5.Transmissionbelt
3.Transmission
7.Removethetransmissiontensionspring.
8.Removethetransmissionbeltfromthe
transmissionpulley.
9.Removethetransmissionbelt.
10.Toinstallanewtransmissionbelt,reversethe
stepsabove.
AdjustingtheTransmission
Ifthemachinestartstolosetraction,checkandadjust
thetransmission.
1.Shutofftheengineandwaitforallmovingparts
tostop.
2.Disconnectthewirefromthesparkplug.
3.Loosentheboltandnutholdingthebracketinto
place.
4.Adjustthebracketsothatitisincontactwiththe
transmission.
Note:Thebracketpreventsthetransmission
fromtippingtothepointwherethetransmission
beltcomesoff.
5.Tightentheboltandnuttosecurethebracket
intoplace.
28