Need help?Do you have a question about the Toro TWRS-I and is the answer not in the manual?
General| Brand | Toro |
|---|---|
| Model | TWRS-I |
| Category | Accessories |
| Language | English |
Accesses receiver setup and operating features.
Selects settings within receiver setup and operating features.
Adjusts for optimal signal reception.
High-resolution LCD screen for system operation reference.
Indicators for rain/freeze status and watering hold.
Bypasses the rain sensor operation for manual control.
Install one screw into the wall at the intended receiver location.
Hang receiver on screw, ensuring keyhole slot engages.
Connects sensor to controller with dedicated sensor input terminals.
Sets rainfall accumulation level to trigger sensor.
Manually activates the sensor for setup and testing.
Two 3V lithium batteries provide approximately five years of service.
Positioned downward for maximum signal transmission.
Adjusts sensor to preferred rainfall threshold activation point.
Positions Quick Clip bracket on gutter edge and secures with thumb screw.
Replaces Quick Clip bracket with pipe-mount adapter for PVC pipe installation.
Loosen screw, align vertically, and tighten for proper sensor orientation.
Displays current scale and allows selection of Celsius or Fahrenheit.
Displays current threshold setting for adjustment.
Addresses issues with weak or inconsistent signal strength.
Troubleshooting steps for a blank receiver display.
Solutions for the sensor not activating the receiver.
Checks wire connections for sensor response issues.
To Next Page
