9
English
Sensor Module Features
1– Rain Threshold Adjustment–Adjusts the rain sensor to
accumulate 3mm, 6mm,12mm or 19mm of rainfall before
signaling the receiver to hold watering. The factory default
setting 6mm.
2– Sensor Test Spindle–Pressed to manually activate the
sensor for setup and test procedures.
3– Batteries (not shown)–Two 3V lithium batteries, installed
at time of manufacture, will provide approximately five
years of service under normal use conditions.
4– Antenna–Positioned downward for maximum signal
transmission strength.
5– Pipe-mount Adapter–Replaces Quick Clip mounting
bracket to enable installation on a length of 13mm thick-
wall PVC pipe.
6– Quick Clip
TM
Mounting Bracket–Simplifies sensor
module installation. Adjustable pivot point for easy
vertical alignment.
1
2
3
4
5
6
To Next Page
Loading...
