Operation
19
1
2
3
1861
Figure 13
1. Traction control pedal
2. Forward
3. Backward
Stopping the Machine
To stop the machine, release the traction control
pedal, disengage the blade control (PTO), and turn
the ignition key to “OFF” to stop the engine. Also set
the parking brake if you leave the machine
unattended; refer to Setting the Parking Brake,
page 12. Remember to remove the key from the
ignition switch.
POTENTIAL HAZARD
• Someone could move or attempt to operate
the tractor while it is unattended.
WHAT CAN HAPPEN
• Children or bystanders may be injured if
they use the tractor.
HOW TO AVOID THE HAZARD
• Always remove the ignition and “key
choice” keys and set the parking brake
when leaving the machine unattended, even
if just for a few minutes.
To Next Page
Loading...
Need help?
General
