Toro XL Series - Page 128

MOWER
A6-13XL Lawn Tractor Service Manual
Fig A6 026 fi g. 37 m-4630
4. Install the mower pivot mount brackets onto the front
axle with the bolts and locknuts (Fig. A6 026).
Fig A6 025 fi g. 41 71429
3. Install the mower belt onto the electric clutch pulley
(Fig. A6 025 top view).
5. Move the height-of-cut lever into the D notch.
6. Remove the lift assist spring between the mower
right side lift bracket and the retaining bolt (Fig. A6
027).
Note: Use the spring tool provided with the
machine.
Fig A6 027 fi g. 35 m-1851
7. Move the height-of-cut lever into the A notch.
A. Electric clutch pulley B. Mower belt
A
B
A. Bolts 5/16” x 2-1/2” C. Locknuts
B. Pivot mount brackets
A
B
C
A. Spring C. Spring tool
B. Bolt
A
B
C