Toro XL Series - Page 20

XL Lawn Tractor Service Manual 2 - 3
XL GEAR DRIVE
10. Remove the brake return spring (Figure 11).
Figure 11
mvc-808
11. Unhook the brake spring from the clutch/brake rod
(Figure 12).
Figure 12
iso3
12. Before removing the 4 transaxle bolts, put a floor
jack under the transaxle so you can lower it from
the frame. Remove the 4 bolts, washers, and nuts
(Figure 13).
Figure 13
mvc-810
13. Lower the transaxle slightly so you can free it from
the two front torque straps. Unhook the brake
spring from the transaxle brake arm (Figure 14).
Figure 14
mvc-811
(A) Spring (B) Clutch/brake rod
A
B